Topside Paint for a Real Refit: Awlgrip, Pettit, Rust-Oleum, and TotalBoat Wet Edge Compared

Choosing the wrong topside paint can cost you a season and a few hundred dollars in do-overs. Here's how four major systems compare across durability

Polyester vs. Epoxy Laminating Resin: Choosing the Right System for Fiberglass Boat Repairs

If you're about to buy resin for a fiberglass repair and you're not sure whether to reach for polyester or epoxy, this guide breaks down the real tradeoffs —

Rust-Oleum Marine Topside vs. TotalBoat Wet Edge: Real-World Finish Quality Compared

Two popular one-part topside paints, two very different strengths. Here's how Rust-Oleum Marine Topside and TotalBoat Wet Edge stack up on coverage

Hard vs. Ablative Bottom Paint: Choosing Right for Your Slip or Trailer Situation

Not all antifouling bottom paint works the same way — and picking the wrong type for how you store your boat can cost you a full repainting season. Here's how

Antifouling Bottom Paint for Fiberglass Boats: Ablative vs. Hard in Saltwater and Fresh

Choosing the wrong bottom paint costs you a full haul-out season. This guide breaks down ablative vs. hard antifouling systems for fiberglass hulls — with real

Fiberglass Repair From Cosmetic Gelcoat to Structural Lamination: Choosing the Right Kit

Not every fiberglass repair is the same — some are skin-deep, others go all the way to the hull's load-bearing layers. Here's how to read the damage and choose